30 lb/hr high impedance injectors based on OEM design to keep the price low and quality high. They are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed drivability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs.

Features:

• Fuel Injector Spray Angle & Pattern and Fuel Volume per millisecond meet or exceed OEM specifications
• Injector Nozzles designed for optimum fuel atomization (mist) for increased performance and fuel economy
• Rapid-Pulse Technology ensures proper fuel delivery at all RPM ranges
• Robotic Build Technology allows for consistent build quality and specification balance

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

These are the long style injectors with domestic style 14mm o-rings. They have an EV6 connector but we offer optional EV1 adapters for adapting them to older style harnesses that use the rectangular EV1 connector. Note this makes the connector longer by about 1" so check for clearance with your intake manifold and rail before ordering them with adapters. 

The ECU dictates if you must run low or high impedance injectors. Our PIMPx can run either High Impedance or Low Impedance (4 cyl only). Our PiMPxs, PiMPxshift, and Microsquirt requires High Impedance.

This listing is for 8 injectors!