-For Factory Equipped Sequential EFI Applications (86-95 Mustangs, 94-95 Mass-Air F-Series/Bronco)
-Also For Factory Batch Fire Applications that want to convert to Sequential EFI (Wiring Mods & Ignition System Changes Required for Sequential Conversion)
This kit combines two of our other listings for people who want to get it all in one big kit. For complete details about the ECU, CAS, Coil on Plug kits, and IGN-1A Coils, you can view their individual listings below:
PiMPxs ECU Details Here
CAS (Cam Angle Sensor) Details Here
Coil on Plug Details Here
IGN-1A Coil Details Here
-1GB USB Flash Drive (containing all required software, startup instructions, base tune, etc)
-Licensed TunerStudioMS Tuning Software When Software Option is Selected at Checkout ($69.95 value, More Info)
-MegaLogViewer Datalogging Software (More Info)
-USB Tuning Cable - 5' Length
-Silicone Vacuum Hose For Internal MAP Sensor - 6' Length
-PiMPxs Engine Management Sticker
-PiMPxs Quick Start Guide (Digital/Printable)
-MS3 Advanced Feature Guide (Digital/Printable)
-Online Technical Support via Forum (Support is provided by paid professionals, not other PiMPxs users)
-Online Tuning Guides via Forum
-Online Tutorials via Forum
-CAS (Cam Angle Sensor)
-Coil Near Plug Expansion Harness
-IGN-1A Coil Harness (Connects Direct to Coils)
-IGN-1A Coils x8
-Windows 95 or Newer Laptop w/Standard USB Port
-Wideband o2 Sensor Controller with Analog Output (Available as Add-On, see AEM & Spartan Options HERE)
-Factory Ford Wiring Harness for your Ford vehicle (or purchase new custom PiMPxs Harness from Related Products below)
-ACT Sensor for vehicles not factory equipped (ACT Sensor & Wiring Pigtail available in Checkout Options)
-VSS Sensor for vehicles not factory equipped (optional, required if you want to use speed-based features)
-IGN-1A Coil Brackets/Mounts
Tested Direct Plug & Play (Sequential EFI) Into:
-86-95 5.0 Mustang (Minor wiring mods for 94-95 GT's)
-Mid 90's F-150 & Bronco with Mass-Air (manual trans or non-computer controlled auto transmission only, E4OD equipped vehicles would use PiMPxshift)
-Cobra Kit Cars & Other vehicles using engines or sequential harnesses from above applications
Tested Direct Plug & Play (Batch Fire Mode Only) Into:
-89-95 Thunderbird (Including SC / Super Coupe), minor wiring mods
-85-95 F-150, Bronco, 1st Gen Lightning (Trans controller like our PiMPxshift required for E4OD applications)
-Cobra Kit Cars & Other vehicles using engines or harness from batch fire applications
-All applications above can run sequential EFI with this ECU if wired for sequential injection and running our CAS on the distributor, or a crank trigger and cam position sensor.
Also Capable of Running:
-Virtually any other EEC-IV EFI (OBD-1, ~1983-1995) Ford vehicles without computer controlled transmission
If a PiMPxs is purchased, no harness modifications are required for factory application with sequential EFI provided your application uses the popular “A9L” pinout for 86-93 5.0 Mustangs, otherwise a handful of wires will have to be moved which we'll explain how to do.
All of the software and documentation needed to get you up and running comes on a 1GB USB Flash Drive. That way you don't need wireless internet to access these items. A 20+ page startup guide covers every detail to get you up and running including PiMPxs installation, software setup, and hardware configuration. The PiMPxs section of our Tech Forum is available to cover any questions you may have that aren't covered in the startup guide.
Note that all PiMPxs ECU's are built exactly the same from a hardware standpoint. The end user can configure the PiMPxs to work with the vehicles/engines listed above without needing to send the unit back for upgrading or modification. This means you can use it in a 2.3 powered car. Then if you purchase another 83-95 Ford down the road, you can re-configure it to work in the new car without issue. This is a feature that is exclusive to the PiMPxs and not available elsewhere.
Also note that the PiMPxs comes with all features built-in. No need to pay for each feature or send it back to upgrade to additional features (unless they are advanced features that are not listed above). Some features do require some external hardware (nitrous solenoids, boost solenoid, flex fuel sensor, water injection pump, switches or relays, solid state relays, etc.). Also note that you can get $60 worth of software for only $39.99 with this ECU which you will not find anywhere else.
-Not for on-road use in vehicles required to be emissions compliant.
PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | V8
- Brand: Stinger Performance Engineering
- Product Code: PiMPxs-CAS-COP-IGN1A-8
- Availability: 10
Tags: PiMPxs, PiMP, Standalone, Sequential, Coil On Plug, Coil Near Plug, COP, CAS, Cam Angle Sensor, Expansion, IGN1A, IGN-1A, Coils, PNP, Plug and Play, Plug & Play, Stand, Alone, Tuning, Tune, Programmable, Engine, Management, ECU, ECM, Computer, Turbo, Mustang, Thunderbird, Coupe, V8, 5.0, Lincoln, Mark, VII, Taurus SHO, SHO, Taurus, Probe, F150, Cobra, Kit Car, EFI, Fuel Injection, Controller, Coil On Plug, Coil Near Plug, COP, 5.8, 351, 302, 460, 300, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, foxbody, fox body, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, f250, f350, F-150, F-250, F-350, EEC, EEC-IV, EEC-4, EEC4, compter, compters, Foxbody ecm, fox body, Stand alone power control, unit, module, Stand alone pcu, Obd1 tuner, OBD-1 tuner, Windsor stand alone pcu, Maf conversion, Ford mustang computer, smog, egr, delete, bronco, BBF, SBF, Small Block, Big Block, factory five, unique, motorcars, era replicas, everett-morrison, shell valley, ultimate, classic cars, mcgill, hurricane, backdraft