-For Factory Equipped Sequential or Batch Fire EFI Applications with E4OD or 4R70W Transmission (86-95 Mustangs with trans swap, 88-95 Speed Density or Mass-Air F-Series/Bronco, Any Swap Application)
-Also For Factory Batch Fire Applications that want to convert to Sequential EFI (Wiring Mods & Ignition System Changes Required for Sequential Conversion)
This kit combines two of our other listings for people who want to get it all in one big kit. For complete details about the ECU, CAS, Coil on Plug kits, and IGN-1A Coils, you can view their individual listings below:
PiMPxshift ECU+Trans Control Details Here
CAS (Cam Angle Sensor) Details Here
Coil on Plug Details Here
IGN-1A Coil Details Here
-1GB USB Flash Drive (containing all required software, startup instructions, base tune, etc)
-Licensed TunerStudioMS Tuning Software When Software Option is Selected at Checkout ($69.95 value, More Info)
-MegaLogViewer Datalogging Software (More Info)
-USB Tuning Cable - 5' Length
-Silicone Vacuum Hose For Internal MAP Sensor - 6' Length
-PiMPxshift Engine Management Sticker
-PiMPxshift Quick Start Guide (Digital/Printable)
-MS3 Advanced Feature Guide (Digital/Printable)
-Online Technical Support via Forum (Support is provided by paid professionals, not other PiMPxshift users)
-Online Tuning Guides via Forum
-Online Tutorials via Forum
-CAS (Cam Angle Sensor)
-Coil Near Plug Expansion Harness
-IGN-1A Coil Harness (Connects Direct to Coils)
-IGN-1A Coils x8
-Windows 95 or Newer Laptop w/Standard USB Port
-Wideband o2 Sensor Controller with Analog Output (Available as Add-On, see AEM & Spartan Options HERE)
-Factory Ford Wiring Harness for your Ford vehicle
-ACT Sensor for vehicles not factory equipped (ACT Sensor & Wiring Pigtail available in Checkout Options)
-VSS Sensor for vehicles not factory equipped (optional, required if you want to use speed-based features)
-IGN-1A Coil Brackets/Mounts
Tested Plug & Play (Sequential or Batch EFI) Into:
-MAF Equipped (via swap or stock) F-Series Trucks/Bronco/Lightning With OBD-1/EEC-4 ECU (88-95) with E4OD or 4R70W transmission
-1994-1995 SN95 Ford Mustang GT & Mustang Cobra
-Other vehicles using engines or sequential harnesses from above applications
Tested Plug & Play (Batch Fire Mode Only) Into:
-Speed Density 85-95 F-150, Bronco, 1st Gen Lightning with E4OD or 4R70W transmission
-Other vehicles using engines or harness from batch fire applications above
Also Capable of Running:
-Virtually any other vehicle with a drivetrain from applications above
If a PiMPxshift is purchased, minor harness modifications are required for factory application with sequential EFI to convert it to the popular “A9L” pinout for 86-93 5.0 Mustangs, which we'll explain how to do in the documentation.
All of the software and documentation needed to get you up and running comes on a 1GB USB Flash Drive. That way you don't need wireless internet to access these items. A 20+ page startup guide covers every detail to get you up and running including PiMPxshift installation, software setup, and hardware configuration. The PiMPxshift section of our Tech Forum is available to cover any questions you may have that aren't covered in the startup guide.
Note that all PiMPxshift ECU's are built exactly the same from a hardware standpoint. The end user can configure the PiMPxshift to work with the vehicles/engines listed above without needing to send the unit back for upgrading or modification. This means you can use it in a 2.3 powered car. Then if you purchase another 83-95 Ford down the road, you can re-configure it to work in the new car without issue. This is a feature that is exclusive to the PiMPxshift and not available elsewhere.
Also note that the PiMPxshift comes with all features built-in. No need to pay for each feature or send it back to upgrade to additional features (unless they are advanced features that are not listed above). Some features do require some external hardware (nitrous solenoids, boost solenoid, flex fuel sensor, water injection pump, switches or relays, solid state relays, etc.). Also note that you can get $60 worth of software for only $39.99 with this ECU which you will not find anywhere else.
Checkout Process - What the Options menu below with different prices means:
-Software License is required for anyone who doesn't already have a TunerStudio License from another project. The License unlocks advanced features like VE Live Auto Tune and such.
-No License is only for people who already have a licensed/registered version of the TunerStudio software from a previous project and therefore don't need another one.
-Side Port USB is the default method for connecting to the laptop. This requires removing the factory ECU hanger and drilling a hole or cutting a notch in it for some applications (like F-Series trucks) so the cable can plug into the ECU since the USB port is on the side of the ECU.
-Expansion Port USB is an alternative method if you don't want to modify the hanger but want to still use USB with a single 5ft cable. This connects to the expansion port in the ECU and exits out the back (as shown in the 3rd image), opposite of where the engine harness connects.
-Expansion Port Serial is an alternative method if you don't want to modify the hanger, or if your laptop has a 9 pin serial port that you want to use instead of USB. This connects to the expansion port in the ECU and exits out the back (as shown in the 3rd image), opposite of where the engine harness connects. This option also allows you to connect wirelessly if you connect a bluetooth or wi-fi adapter to the serial port (email for details).
-Expansion Port Serial With USB Adapter is an alternative method if you don't want to modify the hanger but want to retain USB connectivity because your laptop doesn't have a 9 pin serial port. This connects to the expansion port in the ECU and exits out the back (as shown in the 3rd image), opposite of where the engine harness connects. This and "Expansion Port USB above are functionally the same, this one just does it with two cables (2.5mm to serial adapter, then serial to USB adapter). Only advantage to two cables is if you may want to use a wireless adapter later with a wifi or bluetooth adapter and need that 2.5 to serial adapter to do so, but still want to be able to connect via USB to your laptop initially, or as a backup method. This option allows you to do both.
-All we actually need here is the intake & exhaust duration @.050". For non-custom cams you can just enter the cam number and we can look up this info if you don't have it. For custom cams you'll need to provide the duration @.050". If you have no way or knowing, just say "Mid Cam".
-Not for on-road use in vehicles required to be emissions compliant.
PiMPxshift w/ Transmission Control + CAS + COP Kit | Sequential or Batch EFI | V8
- Brand: Stinger Performance Engineering
- Product Code: PiMPxshift-CAS-COP-IGN1A-8
- Availability: 10
Tags: PiMPxshift, PiMPxs, PiMP, Standalone, Sequential, Batch Fire, PNP, Plug and Play, Plug & Play, Stand, Alone, Programmable, Engine, Transmission, Trans, Management, ECU, ECM, TCU, TCM, Computer, Turbo, V8, I6, 300, 302, 351, 460, 7.5, 5.0, 5.8, Lincoln, V6, F150, Lightning, Gen 1 Lightning, First Gen Lightning, EFI, Fuel Injection, Tuning, Tune, Controller, Coil On Plug, Coil Near Plug, COP. 5.8, 351, 302, 460, 300, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, foxbody, fox body, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, f150, f250, f350, F-150, F-250, F-350, EEC, EEC-IV, EEC-4, EEC4, compter, compters, Foxbody ecm, fox body, Stand alone power control, unit, module, Stand alone pcu, Obd1 tuner, OBD-1 tuner, Windsor stand alone pcu, Maf conversion, Ford mustang computer, smog, egr, delete, E4OD, 4R70W, E40D, 4R70, bronco