This expansion harness plugs into the ECU's expansion port, through the firewall, and to the engine. It is completely independent of the engine harness itself so it works with stock Ford harnesses, or our PiMPx/PiMPxs harnesses. It allows you to ditch the TFI module, stock ignition system/coil, etc. and convert to a modern coil per cylinder/coil near plug/coil on plug ignition system. It's designed to connect directly to our CAS conversion kit or you can ditch the distributor entirely and run a crank trigger and cam sensor of your choosing. The harness connects directly to the stock GM coil harness (the harness that connects 4 LS truck coils to a single connector) or you can choose the IGN-1A coil harness that connects directly to the IGN-1A and includes all of the power and grounds required to run them.

Features:
--Fully assembled kit is the connector with 32 wires crimped and installed in the connector, terminated connectors, relays, and wiring loom. 
--All wires have their function printed on the wire, and are color coded for ease of use. 
--Also contains all of the wires in the standard expansion pigtail that aren't part of the coil/ignition conversion. All of those "extra" wires are rolled up and kept inside the firewall for a clean install. Then you can pull whichever additional features you want to use through the firewall. Complete list of functions is provided in the PiMPxs Startup Guide Table 2. 
--Works with stock Ford engine harness or our PiMPx/PiMPxs engine harnesses. 
--9ft Total Length. 

Includes:
--Coil Near Plug Expansion Harness
--LS Coil Sub-Harness (Connects to GM LS Coil Harness) or IGN-1A Coil Harness (Connects Direct to Coils). 

Requires Either:
--LS Truck Coils with GM Coil Harness (connects four coils to a single connector that plugs into expansion sub-harness) 
or 
--IGN-1A Coils 
--Plug Wires
--Coil Brackets/Mounts

Instructions & Documentation:
--Harness User Manual: CLICK HERE 
--CAS User Manual: CLICK HERE


Not for original PiMP
 

Write a review

Please login or register to review

Coil Near Plug Expansion Harness | For LS Coils or IGN-1A Coils | 4 Cyl | PiMPx | PiMPxs

  • $289.99
  • $274.99


Available Options


Related Products

PiMPx Standalone Engine Management (Batch Fire EFI)

PiMPx Standalone Engine Management (Batch Fire EFI)

-For Factory Equipped Batch Fire EFI Applications (83-95 2.3 Mustangs/Rangers, 85-95 Speed Density F..

$869.99 $899.99

PiMPxs Standalone Engine Management (Sequential EFI)

PiMPxs Standalone Engine Management (Sequential EFI)

-For Factory Equipped Sequential EFI Applications (86-95 V8 Mustangs, 94-95 Mass-Air V8 F-Series/Bro..

$995.99 $1,099.99

PiMPx | PiMPxs | PiMPxshift Expansion Port Pigtail Harness

PiMPx | PiMPxs | PiMPxshift Expansion Port Pigtail Harness

The expansion port allows for options not supported by the factory harness such as sequential spark ..

$79.99

PiMP | PiMPx ECU Wiring Harness for Ford V8 Engines (Batch Fire)

PiMP | PiMPx ECU Wiring Harness for Ford V8 Engines (Batch Fire)

Designed exclusively for our PiMP & PiMPx ECU's when running a Ford V8 engine with bat..

$565.99 $589.95

PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)

PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)

-For Factory Equipped Pre-OBD2 EFI Applications with AOD-E, 4R70W, or E4OD Transmission (F-Series, S..

$1,399.99 $1,529.99

CAS & Expansion Coil/Ignition Harness Kit | 4 Cyl | PiMPx | PiMPxs

CAS & Expansion Coil/Ignition Harness Kit | 4 Cyl | PiMPx | PiMPxs

Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansio..

$569.99 $589.99

Cam Angle Sensor | CAS | TFI Distributor Conversion Kit

Cam Angle Sensor | CAS | TFI Distributor Conversion Kit

This kit is designed to work with Ford TFI distributors and PiMP, PiMPx, PiMPxs, PiMPxshift, Megasqu..

$299.99 $329.99

Coil Near Plug Expansion Sub-Harness for LS Coils | PiMPx | PiMPxs | PiMPxshift

Coil Near Plug Expansion Sub-Harness for LS Coils | PiMPx | PiMPxs | PiMPxshift

This expansion sub-harness plugs into the Coil Near Plug Expansion Harness and to the GM coil harnes..

$64.99

IGN-1A Smart Coil | Coil On Plug | Coil Near Plug

IGN-1A Smart Coil | Coil On Plug | Coil Near Plug

This High Output Ignition Coil is an inductive smart coil capable of producing extremely high spark ..

$69.99 $79.99

Coil Brackets | IGN-1A Smart Coils | Remote Mount | Billet Aluminum

Coil Brackets | IGN-1A Smart Coils | Remote Mount | Billet Aluminum

These brackets can be used to mount our IGN-1A Smart Coils (also sold by Holley, AEM, AMP EFI, etc.)..

$59.99 $49.99

CAS & Expansion Coil/Ignition Harness Kit | V8 | PiMPx | PiMPxs | PiMPxshift

CAS & Expansion Coil/Ignition Harness Kit | V8 | PiMPx | PiMPxs | PiMPxshift

Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansio..

$599.99 $625.99

CAS + Expansion Coil/Ignition Harness Kit + IGN-1A Coils | 4 Cyl | PiMPx | PiMPxs

CAS + Expansion Coil/Ignition Harness Kit + IGN-1A Coils | 4 Cyl | PiMPx | PiMPxs

Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansio..

$859.99 $899.99

CAS + Expansion Coil/Ignition Harness Kit + IGN-1A Coils | V8 | PiMPx | PiMPxs | PiMPxshift

CAS + Expansion Coil/Ignition Harness Kit + IGN-1A Coils | V8 | PiMPx | PiMPxs | PiMPxshift

Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansio..

$1,169.99 $1,259.99

Tags: PiMPx, PiMPxs, PiMPxshift, Expansion, Harness, coil, near, plug, on, ls, truck, ign-1a, CAS, 2.3, 4, Coil On Plug, Coil Near Plug, COP, 2.3, 2.3L, 2.3T, 2.3 Turbo, Mustang, Thunderbird, Ranger, Merkur, XR4TI, Lima