Designed exclusively for our PiMP and PiMPx batch fire ECU's when running a 2.3 Ford based engine. Two versions are available, this is the batch fire version that has injectors wired in pairs like the stock harness which is compatible with the original PiMP and the PiMPx. Engine harness is complete with circuits for electric fan, fuel pump, water temp, oil pressure, and alternator. Comes with enough high temp zip loom and harness wrap to complete once lengths and layout is verified. Wires are labeled individually for use, including wires for PiMP | PiMPx | PiMPxs optional features. Also includes firewall grommet and complete instructions. 

Harnesses are drop shipped by Ron Francis via UPS ground service and most of them are made to order (not stocked) so immediate shipment is not expected.

-Cannot be used with factory ECU's as it deletes VAM, Knock, EGR, MAP, etc.
-Also works with DIY MSPNP Gen 2
-Download install instructions here: INSTRUCTIONS

Write a review

Please login or register to review

PiMP | PiMPx ECU Wiring Harness for Ford 2.3 Engines (Batch Fire)

  • Brand: Ron Francis
  • Product Code: PM-65
  • Availability: 1
  • $559.95
  • $535.99


Related Products

PiMPx Standalone Engine Management (Batch Fire EFI)

PiMPx Standalone Engine Management (Batch Fire EFI)

-For Factory Equipped Batch Fire EFI Applications (83-95 2.3 Mustangs/Rangers, 85-95 Speed Density F..

$869.99 $899.99

PiMPxs ECU Wiring Harness for Ford 2.3 Engines (Sequential EFI)

PiMPxs ECU Wiring Harness for Ford 2.3 Engines (Sequential EFI)

Designed exclusively for our PiMPxs ECU when running a 2.3 Ford based engine. Two versions are avail..

$539.99 $559.95

PiMP | PiMPx ECU Wiring Harness for Ford V8 Engines (Batch Fire)

PiMP | PiMPx ECU Wiring Harness for Ford V8 Engines (Batch Fire)

Designed exclusively for our PiMP & PiMPx ECU's when running a Ford V8 engine with bat..

$565.99 $589.95

Wiring Harness for Ford 2.3 Turbo Engine Swaps

Wiring Harness for Ford 2.3 Turbo Engine Swaps

This harness designed for swapping Ford's 2.3 Turbo into other late model Fords (though it's a good ..

$619.99 $649.95

Wiring Kit for Ford 2.3 Turbo Engines (Telorvek)

Wiring Kit for Ford 2.3 Turbo Engines (Telorvek)

You get everything you need for your engine to run like factory. Based on the Telorvek panel, the sy..

$679.99 $714.95

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | V8

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | V8

-For Factory Equipped Batch Fire EFI Applications (85-95 Non-Mustang Ford V8's, 88-95 Speed Den..

$1,925.99 $2,049.99

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | 4 Cyl

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | 4 Cyl

-For Factory Equipped Batch Fire EFI 4 Cyl Applications who want the benefits of coil on plug w..

$1,655.99 $1,799.99

Tags: PiMP, PiMPx, DIY, MSPNP2, PNP2, MSPNP, Gen2, ECU, Wiring, Harness, 2.3T, Turbo, Engine harness, 2.3 turbo, Ron, Francis, PM-65, 2.3, 2.3L, 2.3 Turbo, Mustang, Merkur, Xr4ti, Thunderbird, Ranger, Ford