-For Factory Equipped Batch Fire EFI 4 Cyl Applications who want the benefits of coil on plug without converting to sequential fuel injection. 

This kit combines two of our other listings for people who want to get it all in one big kit. For complete details about the ECU, CAS, Coil on Plug kits, and IGN-1A Coils, you can view their individual listings below:

PiMPx ECU Details Here
CAS (Cam Angle Sensor) Details Here
Coil on Plug Details Here
IGN-1A Coil Details Here

Instructions & Documentation:
--CAS User Manual: CLICK HERE
--Harness User Manual: CLICK HERE 

Includes:
-PiMPx ECU
-1GB USB Flash Drive (containing all required software, startup instructions, base tune, etc)
-Licensed TunerStudioMS Tuning Software When Software Option is Selected at Checkout ($69.95 value, More Info)
-MegaLogViewer Datalogging Software (More Info)
-USB Tuning Cable - 5' Length
-Silicone Vacuum Hose For Internal MAP Sensor - 6' Length
-PiMPx Engine Management Sticker
-PiMPx Quick Start Guide (Digital/Printable)
-MS3 Advanced Feature Guide (Digital/Printable)
-Online Technical Support via Forum (Support is provided by paid professionals, not other PiMPxs users)
-Online Tuning Guides via Forum
-Online Tutorials via Forum
-CAS (Cam Angle Sensor)
-Coil Near Plug Expansion Harness
-IGN-1A Coil Harness (Connects Direct to Coils)
-IGN-1A Coils x4

Requires:
-Windows 95 or Newer Laptop w/Standard USB Port
-Wideband o2 Sensor Controller with Analog Output (See Spartan2 Wideband Controller in Checkout Options)
-Factory Ford Wiring Harness for your Ford vehicle (or purchase new custom PiMPx Harness from Related Products below)
-ACT Sensor for vehicles not factory equipped (ACT Sensor & Wiring Pigtail available in Checkout Options)
-VSS Sensor for vehicles not factory equipped (optional, required if you want to use speed-based features)
-IGN-1A Coil Brackets/Mounts
-Plug Wires

Tested Direct Plug & Play (Batch Fire EFI) Into:
-87-93 2.3 Mustang
-83-86 2.3 Turbo Mustang SVO, Turbo GT
-83-88 2.3 Turbo Thunderbird Turbo Coupe
-85-89 2.3 Turbo Merkur XR4Ti
-87-95 2.3 Turbo Swapped Ranger (TFI Ignition)
-Other vehicles using engine & harness from batch fire applications listed above

Also Capable of Running:
-Virtually any other 4 cylinder EEC-IV EFI (OBD-1, 1983-1995) Ford vehicles without computer controlled transmission

If a PiMPx is purchased, no harness modifications other than sequential injector harness mods are required for factory application with sequential EFI provided your application uses the popular “LA3” pinout for 87-88 Thunderbird Turbo Coupe, otherwise for any other Ford ECU, no pin changes are required to run the engine but may be required for fan control, boost control, launch control, and other optional features. Our PM-65 batch fire PiMPx harness found in the related products below will eliminate the need to move pins, removes unused connectors, and labels wires for the new purpose with the PiMPx. . 

All of the software and documentation needed to get you up and running comes on a 1GB USB Flash Drive. That way you don't need wireless internet to access these items. A 20+ page startup guide covers every detail to get you up and running including PiMPx installation, software setup, and hardware configuration. The PiMPx section of our Tech Forum is available to cover any questions you may have that aren't covered in the startup guide.

Note that all PiMPx ECU's are built exactly the same from a hardware standpoint. The end user can configure the PiMPxs to work with the vehicles/engines listed above without needing to send the unit back for upgrading or modification. This means you can use it in a 2.3 powered car. Then if you purchase another 83-95 Ford down the road, you can re-configure it to work in the new car without issue. This is a feature that is exclusive to the PiMPx and not available elsewhere. 

Also note that the PiMPx comes with all features built-in. No need to pay for each feature or send it back to upgrade to additional features (unless they are advanced features that are not listed above). Some features do require some external hardware (nitrous solenoids, boost solenoid, flex fuel sensor, water injection pump, switches or relays, solid state relays, etc.). Also note that you can get $60 worth of software for only $39.99 with this ECU which you will not find anywhere else.

-Not for on-road use in vehicles required to be emissions compliant.

Write a review

Please login or register to review

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | 4 Cyl

  • $1,875.99


Available Options


Related Products

Fuel Injectors - Seimens Deka - 60 lb/hr | 630 cc/min - High Impedance - EV1 - (4 cyl)

Fuel Injectors - Seimens Deka - 60 lb/hr | 630 cc/min - High Impedance - EV1 - (4 cyl)

Siemens Deka 4 Mototron injectors are a new take on high impedance injectors. Despite the high flow ..

$214.99

Boost Controller (Boost Valve) - Manual - Universal

Boost Controller (Boost Valve) - Manual - Universal

Simple to use manual boost controller. Increases torque even at stock boost level by creating faster..

$34.99

PiMP | PiMPx ECU Wiring Harness for Ford 2.3 Engines (Batch Fire)

PiMP | PiMPx ECU Wiring Harness for Ford 2.3 Engines (Batch Fire)

Designed exclusively for our PiMP and PiMPx batch fire ECU's when running a 2.3 Ford based engi..

$445.99 $454.95

Fuel Injectors - Seimens Deka - 80 lb/hr | 875 cc/min - High Impedance - EV1 - (4 cyl)

Fuel Injectors - Seimens Deka - 80 lb/hr | 875 cc/min - High Impedance - EV1 - (4 cyl)

Siemens Deka 4 Mototron injectors are a new take on high impedance injectors. Despite the high flow ..

$224.99

Fuel Injectors - FID - 100 lb/hr | 1100 cc/min - High Performance - Flow Matched (4 Cyl)

Fuel Injectors - FID - 100 lb/hr | 1100 cc/min - High Performance - Flow Matched (4 Cyl)

The FID 1100's are EV14 based High Impedance fuel injectors utilizing the latest in fuel injector te..

$389.99

Stinger Performance Tech Support Forum

Stinger Performance Tech Support Forum

This link is provided to allow you to search for the forum and be able to find a link to it here. Yo..

$0.00

Tags: PiMPx, PiMP, PNP, Plug and Play, Plug & Play, Standalone, Stand, Alone, Tuning, Tune, Programmable, Engine, Management, batch fire, ECU, ECM, Computer, 2.3, 2.3L, 2.3T, Ford, Turbo, Mustang, Thunderbird, Coupe, Ranger, SVO, EFI, Fuel Injection, Controller, Coil On Plug, Coil Near Plug, COP, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, EEC, EEC-IV, EEC-4, EEC4, compter, compters, Stand alone power control, unit, module, Stand alone pcu, Obd1 tuner, OBD-1 tuner, Windsor stand alone pcu, Maf conversion, Ford mustang computer, smog, egr, delete,