This is a complete Mandrel bent aluminized steel or 409 stainless steel exhaust system from the turbo outlet to the rear bumper including mufflers for 79-93 Mustang Fox Body turbo cars using Stinger center mount header. Features 3" downpipe and intermediate pipe that splits into dual 2.5" tubing for dual mufflers and dual tailpipes. Available with and without clamps, and available in both Aluminized and 409 Stainless Steel tubing. If you don't want to run a muffler at all, select delete pipes instead of the mufflers. 

Turbo blanket is suggested for use with tubular header to protect the spark plug wires and other items from the heat of the 1600 deg turbo exhaust housing. 

Flex pipes are suggested for use with tubular header. 

Flex pipe and cat require removing a section of the exhaust to make room these items. 1.5" flex pipe is for wastegate dump tube. 

Pipes are sent with additional length to allow trimming for different muffler sizes.

  • -Off-road Use Only (no catalytic converter)
  • ​-409 Stainless Exhaust is special order (not always stocked) and therefore may take 1-2 weeks before it is ready to ship
  • -Hi-Flow 3" Magnaflow Catalytic Converter available as an add-on
  • -Hangers not included, the stockers can be welded onto the new pipe, or universal hangers can be used (clamp on or weld on). 

-Works only with Stinger style center mount header

-Applications with external fuel pumps (85 and older) require conversion to in-tank fuel pump to run dual exhaust as the stock fuel pump and filter are located where the passenger side muffler goes.

Note some of the pictures of the kit assembled on the floor show a stock downpipe. A header downpipe is included in this kit, those pictures are just to show the shape of the system when assembled and aren't representative of which downpipe comes in this kit. 

 

Write a review

Please login or register to review

Exhaust System | Complete | Dual | Mustang | 2.3 Turbo | 3" to 2.5" | Header

  • $765.99
  • $749.99


Available Options


Related Products

Magnaflow | Catalytic Converters | 3 Inch | Universal

Magnaflow | Catalytic Converters | 3 Inch | Universal

MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of ..

$124.99

Exhaust | Downpipe | Header | 2.3 Turbo | 3" | Without Turbo Flange | Perfect For Holset & Borg Warner Users

Exhaust | Downpipe | Header | 2.3 Turbo | 3" | Without Turbo Flange | Perfect For Holset & Borg Warner Users

High flow Mandrel bent 3" aluminized mild steel or raw 409 stainless steel downpipe for the Sti..

$110.99

Exhaust | Muffler Delete Pipes | 79-04 Mustang | Offset/Offset | 2.5 Inch | 20 Inch Length

Exhaust | Muffler Delete Pipes | 79-04 Mustang | Offset/Offset | 2.5 Inch | 20 Inch Length

These exhaust pipes are designed for those who want to run our Mustang or Thunderbird full exhaust s..

$44.99 $59.99

Exhaust | Downpipe | Header | 2.3 Turbo | 3" | Internal Wastegate

Exhaust | Downpipe | Header | 2.3 Turbo | 3" | Internal Wastegate

High flow Mandrel bent 3" aluminized mild steel or raw 409 stainless steel downpipe for the Stinger ..

$169.99

Exhaust | Flex Joint Pipe | 3"x6" | Stainless Steel | for Downpipe or Exhaust System

Exhaust | Flex Joint Pipe | 3"x6" | Stainless Steel | for Downpipe or Exhaust System

Flexible couplings are engineered to isolate vibration generated by the engine, thereby relieving st..

$24.99

Exhaust | Mustang | 2.3 Turbo | 3" to Dual 2.5" | Header

Exhaust | Mustang | 2.3 Turbo | 3" to Dual 2.5" | Header

Mandrel bent aluminized steel or raw 409 stainless steel exhaust system for 79-93 Mustang Fox B..

$349.99

Tags: COMPLETE, SYSTEM, Header, Aluminized, Stainless, Steel, SS, Mustang, 2.3, Turbo, 3", 3 inch, Dual, Exhaust, 2.3T, Ford, 2.3L, Systems,