Ultra light weight adjustable cam gear for the Ford 2.3 mini stock engines.  These adjustable gears eliminate the need for the large steel factory belt guide washer as they are machined directly into these gears, the only such 2.3 gear with this design. What this allows is for adjustment of the gear by simply loosening the small bolts without the need to loosen the large center bolt like with other designs. This cam gear is 8 ounces lighter than the stock cam gear, a significant amount when it's reciprocating. 

We've used all the different types of cam gears over the years and this is the absolutely the best design available. We started selling them after the first time we used one and realized how much better they were than others.

Gears feature ARP nuts and bolts to eliminate stripping of the aluminum due to repeated use.  These gears are designed using 3D modeling and FEA testing to provide the lightest Ford 2300 adjustable cam gear on the planet.

We mark these gears with a small dot where the stock timing mark would be so you can easily install it like a stock gear without checking cam lobe location if using a stock cam which removes a ton of hassle/aggravation/confusion during the installation. This is not something any other company offers with this gear or any other. 

Allows 8 degrees of adjustment in both directions (advance or retard), each mark is 2 degrees. Advance the cam to move the power band to a lower range, retard it to move the power range and peak power point higher. 

Before removing stock cam gear, set engine to TDC on the compression stroke (cam timing mark aligned with stock timing marks, or pointing directly at auxiliary shaft centerline if no stock marks exist). If using an aftermarket cam, you can use the mark to get it close but you should find true TDC with a piston stop, mark TDC on the timing pointer (or use our billet adjustable timing pointer), then pull the cam cover and use the "e-bar" method to align the cam to 0 degrees and adjust this cam gear so it aligns with the belt when everything else is set to TDC/zero deg. Wherever this gear is set is your true "straight up" cam position and you can adjust either way from there to move the power band up/down. 

We have both the Round Tooth Profile or Square Tooth Profile. Square tooth is stock on 2.3 turbo applications. Ford Rangers were round tooth starting around 1992. Picture shows Round Tooth Version. These cam gears fit all Lima 2.3 and 2.5 engines from the late 70's to the the last year the Lima engine was used in the Ranger in 2000. The detail that's important is verifying whether you have a square (91 or so and older) or round tooth (92+) application. 

Includes:

  • Adjustable Square Tooth Cam Gear
  • ARP Mounting Bolt w/Integrated Washer. 

Write a review

Please login or register to review

Adjustable Cam Gear | Ultra Light | Ford 2.3L | Square Tooth

  • Brand: NeedHP
  • Product Code: Cam-Gear-Sqr
  • Availability: 7
  • $164.99
  • $149.99


Available Options


Related Products

Billet Timing Pointer | Adjustable | Ford 2.3L

Billet Timing Pointer | Adjustable | Ford 2.3L

Anodized Billet Aluminum Timing Pointer for Ford 2.3 Engines. CNC machined in the USA from 6061-T651..

$64.99 $69.99

Timing Belt Tensioner | Stainless | Billet | Ford 2.3L

Timing Belt Tensioner | Stainless | Billet | Ford 2.3L

Designed for all out racing conditions these tensioners are machined with a stainless steel back pla..

$84.99 $89.99

Aluminum Crankshaft Gear | Ultra Light | Ford 2.3L

Aluminum Crankshaft Gear | Ultra Light | Ford 2.3L

Ford 2.3 billet aluminum crankshaft gear for the high revving Mini Stock race engines.  Gear is..

$69.99 $74.99

Anodized Auxiliary Gear | Ultra Light | Ford 2.3L

Anodized Auxiliary Gear | Ultra Light | Ford 2.3L

These are black anodized aluminum pulleys reduce unnecessary rotating weight, yet strong enough to w..

$79.99 $84.99

Under Drive Pulley Kit | Serpentine | Aluminum| Ultra Light | Ford 2.3L

Under Drive Pulley Kit | Serpentine | Aluminum| Ultra Light | Ford 2.3L

Ultra light under drive serpentine pulley set for the Ford 2.3 Mini Stock race engines.  Pulley..

$169.99 $179.99

Adjustable Round Tooth Timing Belt Conversion Kit | Aluminum | Ultra Light | Ford 2.3L

Adjustable Round Tooth Timing Belt Conversion Kit | Aluminum | Ultra Light | Ford 2.3L

Complete kit to change over to the popular round tooth pulleys. Saves 2 pounds compared to the stock..

$269.99 $279.99

Cam Follower Removal Tool | Rocker Arm Tool | OHC | Spring Compressor

Cam Follower Removal Tool | Rocker Arm Tool | OHC | Spring Compressor

Designed for compressing the valve springs in overhead cam engines to allow cam follower (rocker arm..

$59.95 $69.95

Timing Belt Tensioner | Replacement | Ford 2.3L

Timing Belt Tensioner | Replacement | Ford 2.3L

These Timing Belt Tensioners are designed and built to meet or exceed OE specifications. Optional ti..

$34.99 $39.99

Timing Belt + Tensioner Kit | Replacement | Ford | 2.3 | 79-94

Timing Belt + Tensioner Kit | Replacement | Ford | 2.3 | 79-94

Kit includes both the timing belt and belt tensioner with optional timing pointer. Available with ro..

$49.99 $54.99

Premium Tune-Up Kit | Motorcraft | Ford | 2.3 | Turbo

Premium Tune-Up Kit | Motorcraft | Ford | 2.3 | Turbo

Old or cheap ignition system components and improper plug gap are the most common causes of misfires..

$159.99 $169.99

Tags: square, billet, aluminum, anodized, adjustable, cam, camshaft, timing, gear, sprocket, ultra, light, ultralight, lite, ford, 2.3, 2.3 turbo, 2.3T, 2.3L, 2300, Lima, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99