This Silicone Boost/Vacuum hose is perfect for a variety of applications.

-Replace any rubber hose in your engine bay

-Installation of aftermarket accessories such as a boost gauge or BOV

-Improve the appearance of your engine bay

BE AWARE! Most aftermarket silicone boost/vac hose does not work because it's thin wall and collapses under vacuum causing a wide variety of problems including incorrect gauge readings, poor running engines, false MAP signals, etc. 

It took us a lot of work to get this custom thick wall hose made to our specs that provides increased resistance to collapsing under vacuum while still having all of the other benefits of silicone.

Thick walls are more resistant to puncture, cut, and rubbing damage.

Smooth, slick, shiny and easy to clean, this is show quality hose.

Substantially more resistant to cracking or fading than regular rubber engine bay hoses.

Higher heat and chemical resistance than regular rubber engine bay hoses.

Fitment:

3mm (1/8") ID / 9mm OD fits original PiMP, though we sell specific hose for this application elsewhere. 

4mm (5/32") ID / 12mm OD is a tight fit on our Blow Off Valves and Boost Controllers (Manual & Electronic). 

6mm (1/4") ID / 14mm OD will also work on the Boost Controllers and BOV's but will certainly need clamped. It also works on external wastegates though so if you're hooking up all of these items, this may be best to avoid needing adapter fittings of different sizes.

8mm (5/16") ID / 14mm OD Coming Soon?

10mm (3/8") ID / 16mm OD will fit the larger ports on most vacuum trees and intake manifolds, and is typically the size that goes from the intake manifold or throttle body to the vacuum tree, as well as the vacuum tree to the brake boost. It will also fit the large ports on our billet vacuum tree. 

FITMENT NOTE: This hose is very flexible and expands over barbed fittings well so the 4mm hose for instance will stretch over a 6mm barb fitting. So if you're connecting a 4mm port on your vacuum tree to a wastegate with a 6mm barb fitting, using 4mm hose allows it to work without any adapters while using 6mm hose would require an adapter to get it down to 4mm on one end. 

Sold by the foot - if you order 10 of these, we will ship you a continuous 10-foot length of hose.

Our silicone hose is temperature rated to 392 degrees F, and pressure-rated to 43.5 psi at that 392-degree temperature.

You are purchasing this per foot. So if you want 10 ft, make the quantity 10, if you want 25 ft, make the quantity 25, etc.

Write a review

Please login or register to review

Silicone Thick Wall Boost/Vacuum Hose - 3mm | 4mm | 6mm - Per Foot

  • $4.99
  • $1.59


Available Options


Related Products

Silicone 2.5" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV

Silicone 2.5" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV

Straight 2.5" coupler with a 1.0" tee port for adding a blow off valve or bypass valve to an FMIC ki..

$24.99 $29.99

Silicone Non-Intercooled Turbo Outlet to Throttle Body Coupler & T-Bolt Clamps Kit

Silicone Non-Intercooled Turbo Outlet to Throttle Body Coupler & T-Bolt Clamps Kit

This kit includes an angled 2.38" coupler with two hump sections for additional flex to attach the t..

$24.99 $29.99

Silicone Hump Hose

Silicone Hump Hose

These are silicone hump hoses which can flex approximately 5 degrees to account for slight misalignm..

$13.99 $19.99

Silicone Reducers

Silicone Reducers

These are silicone reducers/adapters that change sizes from one end to the other. Our silicone coupl..

$10.99 $19.99

Silicone Couplers | Elbows | Bends

Silicone Couplers | Elbows | Bends

These are silicone elbows, not straight sections. 2-2.5" 90 Degree Elbow is available in Blue and Bl..

$19.99 $29.99

Wastegate - 38mm External

Wastegate - 38mm External

These external wastegates are built to Stinger Performance specs to perform better than the lower co..

$159.99

Silicone Stock Intercooler Couplers & T-Bolt Clamp Kits

Silicone Stock Intercooler Couplers & T-Bolt Clamp Kits

This kit includes a straight 2.38" coupler for the throttle body attachment and a straight 2.0" coup..

$24.99 $29.99

Blow Off Valve | Dual Piston

Blow Off Valve | Dual Piston

Designed for turbo cars with an Air Flow Meter (VAM/MAF), also works great with Speed Density (MAP) ..

$64.99

Blow Off Valve | Type RFL Single Piston

Blow Off Valve | Type RFL Single Piston

For Speed Density Applications that don't have a MAF or VAM UNLESS it's a blow through MAF and the B..

$64.99

Bypass Valve | Single Piston

Bypass Valve | Single Piston

​Made from billet aluminum, this recirculating bypass valve dumps the boosted air back into the inta..

$64.99

Boost Control | Solenoid | Electric | Pierburg

Boost Control | Solenoid | Electric | Pierburg

Genuine Pierburg Solenoid intended to be used with our PiMP | PiMPx | PiMPxs | PiMPxshift & Micr..

$49.99 $64.99

Silicone 3.0" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV

Silicone 3.0" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV

Straight 3.0" coupler with a 1.0" tee port for adding a blow off valve or bypass valve to an FMIC ki..

$27.99 $32.99

Boost Controller Kit | Manual |  Universal | Stage 2

Boost Controller Kit | Manual | Universal | Stage 2

This is our mid-level manual boost controller kit. Simple to use manual boost controller aka boost v..

$55.99 $69.99

Vacuum Manifold | Tree | Block | 1/8 NPT | 7-Port | Universal

Vacuum Manifold | Tree | Block | 1/8 NPT | 7-Port | Universal

This 7-port vacuum tree is CNC machined out of T6061 billet aluminum and then anodized to harden and..

$28.99 $39.99

Boost Controller Kit | Manual |  Universal | Stage 3

Boost Controller Kit | Manual | Universal | Stage 3

This is our premium manual boost controller kit. Simple to use manual boost controller aka boost val..

$85.99 $109.99

Tags: silicone, hose, thick, wall, vacuum, boost, black