Straight 2.5" coupler with a 1.0" tee port for adding a blow off valve or bypass valve to an FMIC kit. Can also be used to add a blow off valve or bypass valve with 1" inlet to a stock intercooler setup by using this coupler to connect to the throttle body. No need to completely cut the FMIC tubing to add this coupler, simply drill a 1" hole in the tubing and slide this coupler over the tube until it lines the tee port with the drilled hole. Add two 2.88" T-bolt clamps below (or 2.75" clamps if using between the stock intercooler and throttle body) to ensure the couplers don't blow off under boost. Our silicone couplers are constructed of 4 ply material, temperature rated to 392 degrees F, and pressure-rated to 43.5 psi at that 392-degree temperature. Blow Off Valve shown is optional. T-Bolt clamps should be used and are available as an option as well. 

Write a review

Please login or register to review

Silicone 2.5" Coupler with 1.0" Tee Adapter for Adding a BOV/BPV

  • $29.99
  • $24.99


Available Options


Related Products

Clamp | T-Bolt | Stainless Steel

Clamp | T-Bolt | Stainless Steel

These are genuine American made Clampco clamps, not the Chinese junk sold elsewhere. T-Bolt Band Cla..

$3.39

Silicone Non-Intercooled Turbo Outlet to Throttle Body Coupler & T-Bolt Clamps Kit

Silicone Non-Intercooled Turbo Outlet to Throttle Body Coupler & T-Bolt Clamps Kit

This kit includes an angled 2.38" coupler with two hump sections for additional flex to attach the t..

$24.99 $29.99

Silicone Hump Hose

Silicone Hump Hose

These are silicone hump hoses which can flex approximately 5 degrees to account for slight misalignm..

$13.99 $19.99

Silicone Couplers | Elbows | Bends

Silicone Couplers | Elbows | Bends

These are silicone elbows, not straight sections. 2-2.5" 90 Degree Elbow is available in Blue and Bl..

$19.99 $29.99

Silicone Straight Couplers

Silicone Straight Couplers

Our silicone couplers are constructed of 4 ply material, temperature rated to 392 degrees F, and pre..

$6.49 $8.99

Silicone Stock Intercooler Couplers & T-Bolt Clamp Kits

Silicone Stock Intercooler Couplers & T-Bolt Clamp Kits

This kit includes a straight 2.38" coupler for the throttle body attachment and a straight 2.0" coup..

$24.99 $29.99

FMIC Kit | Isuzu NPR | Volvo 740 | Tubing ONLY

FMIC Kit | Isuzu NPR | Volvo 740 | Tubing ONLY

2.5" Mandrel bent tubing for the Isuzu NPR and Volvo intercoolers mounted in the nose of SVO's, Turb..

$109.99

Blow Off Valve | Dual Piston

Blow Off Valve | Dual Piston

Designed for turbo cars with an Air Flow Meter (VAM/MAF), also works great with Speed Density (MAP) ..

$64.99

Bypass Valve | Single Piston

Bypass Valve | Single Piston

​Made from billet aluminum, this recirculating bypass valve dumps the boosted air back into the inta..

$64.99

FMIC Kit | 79-95 Mustang | For Center Mount Header

FMIC Kit | 79-95 Mustang | For Center Mount Header

Front Mount Intercooler Kit for Fox Body Mustangs Are you looking for an easy way to add a front ..

$519.99

Silicone Thick Wall Boost/Vacuum Hose - 3mm | 4mm | 6mm - Per Foot

Silicone Thick Wall Boost/Vacuum Hose - 3mm | 4mm | 6mm - Per Foot

This Silicone Boost/Vacuum hose is perfect for a variety of applications.-Replace any rubber hose in..

$1.59 $4.99

Tags: silicone, tee, bov coupler, bpv coupler, blow off valve, blow, valve, 2.5, turbo, hose, hoses