Set of 2 custom single color vinyl ST logo stickers for Ford Explorer ST door scuff plates. Red ST letters subtle custom touch to your Explorer ST. Easy installation without any special tools or skills. Easy removal with a hair dryer if you decide you want a different color or want to go back to stock. Approximate 10 year life. 

Installation: 

• Clean the scuff plates well. Remove any road debris, dirt, wax, etc. Ideally you'd use an alcohol wipe or a light solution of dish soap to remove any oils for maximum adhesion. 
• Peel the the white backing paper away from the overlay and make sure the overlay stays stuck to the clear mask.
• Hold the edges of the clear mask so you can position the overlay without touching it. If you don't get perfect alignment initially, you can pull it back up if it's only stuck in the center. Once you've got it aligned where you want it, stick it down and then press from one end to the other to remove any bubbles. Now run your fingers over the letters with solid down pressure to maximize adhesion
• Now remove the clear overlay carefully to make sure it doesn't try to remove any of the letters. If it does try to peel them up, press it back down with firm pressure before trying again.