Front Mount Intercooler Kit for Fox Body Mustangs
Are you looking for an easy way to add a front mount intercooler to your 2.3 Turbo powered Mustang, SVO? There is nothing easier than purchasing this complete, bolt on, all inclusive Front Mount Intercooler Kit. These Intercooler Kits will allow you to run an extra 4-10psi over the stock configuration (with our manual boost controller). That additional 4-10psi can produce an extra 30hp-90hp depending on engine mods. This kit uses the Stinger Intercooler available on this site.
This FMIC kit allows the stock radiator to be used. The a/c condenser can be used if it is moved closer to the stock radiator by 1.0". Kit requires no modification to Mustang sheetmetal. Movement or removal of the carbon canister is required. Trimming of the inner fender plastic may also be required depending on vehicle. SVO compressor housing or cutting stock outlet pipe 1" above flange or trimming ears off of turbo compressor outlet flange is required to clamp coupler to turbo housing. Clocking housing to match intercooled 2.3 Mustang (SVO) orientation of straight up to slightly to the passenger side is required as well.
|Designed To Fit:|
Will fit other applications with minor modification.
Everything needed to install:
-Silicone Couplers (Black or Blue)
-Tubing: 2.5" Aluminized Steel
-Intercooler: Rated for up to 700hp.
-Reduces air temp by 150-200ºF depending on Ambient temperature.
Front Mount Intercooler Kit
-For stock turbo placement only (stock exhaust manifold or replacement manifold/header that mimics stock turbo location).
-Standard Blow Off/Bypass Valve Tube is for our Dual Piston BOV or Single Piston BPV. This is a 1" OD Clamp-on Hose Connection, 1" Silicone Hose goes between bung and valve.
-If you are running a valve that requires a custom flange, you'll need to supply the flange and we will weld it on if you select the custom option below.
-65mm Throttle Body option includes 2.5" to 3.0" adapter coupler and larger T-Bolt clamp for connection to the throttle body.
Rotated intake manifold is not included with rotated tubing kits. See elsewhere on our site for ported and/or rotated intakes.
FMIC Kit | 79-95 Mustang | For Stock Location Exhaust Manifold
- Brand: Stinger Performance Engineering
- Product Code: FMIC-Stock-M
- Availability: 10
Tags: Front, mount, intercooler, FMIC, Kit, Stock, location, mustang, inter cooler, inter, cooler, inner, innercooler, IC, inter-cooler, inner-cooler, rotate, rotated, pipe, pipes, tube, tubing, tubeing, 2.3L, 2.3, 2.3T, 2.3 Turbo, Ford