• Oil Return Line | Stock Turbo Manifold | Version 3 | Line Only | No Fittings | Replacement

Braided stainless steel teflon lined oil return line without any fittings. If you accidentally kinked your return line or didn't hold it when tightening and twisted the braid or did something else to damage it, this is your way to replace it without having to buy all of the fittings and flanges again.

DO NOT BUY THIS VERSION IF YOU DON'T HAVE OUR FITTINGS ALREADY. Line will not work with generic turbo fitting (ours is a custom longer flange for proper line alignment) and the block fitting isn't some generic hardware store piece either. 

Version 2 went from AN-8 to AN-10 for nearly double the oil flow. Version 3 now adds manually shortened crimp sections to increase length of the braided section which makes installation easier and more forgiving. 

WILL ONLY WORK WITH FITTINGS FOR VERSION 2 OR VERSION 3 (5/8" ID). Will not work with fittings for the original AN-8 (1/2" ID) version from a decade ago. 

Designed to work with IHI, T3, and T3/T4 Hybrid turbos, fitment on other turbos (Holset, GT, Borg Warner, etc.) is unknown. Line is designed for use with stock exhaust manifolds. Fitment with log or aftermarket "stock location" manifolds isn't guaranteed. 

INSTALL GUIDE: Click Here

 

Write a review

Please login or register to review

Oil Return Line | Stock Turbo Manifold | Version 3 | Line Only | No Fittings | Replacement

  • $62.99


Available Options


Related Products

Oil Return Line | Stock Turbo Manifold | Version 3 | Turbo | Stock Replacement IHI & T3

Oil Return Line | Stock Turbo Manifold | Version 3 | Turbo | Stock Replacement IHI & T3

Braided stainless steel teflon lined oil return line with all the necessary fittings installed and r..

$84.99

Oil Return Line | Center Mount Header | Turbo

Oil Return Line | Center Mount Header | Turbo

Braided stainless steel covered teflon lined oil return line for use with center mount header with a..

$75.99

Oil Feed Line | Inlet | Stock Location Manifold | Turbo

Oil Feed Line | Inlet | Stock Location Manifold | Turbo

Braided stainless steel Teflon lined oil feed line for stock exhaust manifold or stock location exha..

$45.99

Flange | Turbo Oil Return Drain | AN-10

Flange | Turbo Oil Return Drain | AN-10

Billet aluminum turbo return/drain flange for all turbos with a 2" (50.8mm) return flange bolt spaci..

$15.99 $19.99

Oil Feed Line | Inlet | Center Mount Header | Turbo

Oil Feed Line | Inlet | Center Mount Header | Turbo

Braided stainless steel Teflon lined oil feed line for top mount center mount "Stinger" type header ..

$45.99

Oil Feed Line | Inlet | Flipped Manifold | Turbo

Oil Feed Line | Inlet | Flipped Manifold | Turbo

Braided stainless steel Teflon lined oil feed line for flipped exhaust manifold utilizing our exhaus..

$49.99

Oil Feed Line | Inlet | Centered Manifold | Turbo

Oil Feed Line | Inlet | Centered Manifold | Turbo

Braided stainless steel Teflon lined oil feed line for log type exhaust manifold with centered turbo..

$48.99

Oil Return Line | Bo-Port Center Mount Header | Turbo

Oil Return Line | Bo-Port Center Mount Header | Turbo

Braided stainless steel covered teflon lined oil return line for use with Bo-Port center mount heade..

$99.99

Oil Return Line | Flipped Manifold | Flip Adapters | Turbo

Oil Return Line | Flipped Manifold | Flip Adapters | Turbo

Braided stainless steel covered teflon lined oil return line for use with our flip adapters that all..

$79.99

Oil Return Line | Center Mount Log | Turbo

Oil Return Line | Center Mount Log | Turbo

Braided stainless steel covered teflon lined oil return line for use with center mount log manifold ..

$79.99

Tags: turbo, oil, return, outlet, exit, line, t3, ihi, 2.3 turbo, ford, 2300, 2.3, 2.3L, 2.3T, Turbo, SVO, Thunderbird, Turbo Coupe, Merkur, XR4Ti, Ranger,