Custom two color vinyl sticker overlays for the front and rear oval "KIA" emblems on your 2017-2021 Kia Stinger. Better adhesion than the domed style overlays, plus they don't stick out any farther than stock, unlike the domed overlays. Easy installation without any special tools or skills, though some patience a hair dryer or heat gun can be useful, especially for the carbon fiber version. None-destructive installation and removal so it's easy to change the design or go back to stock in the future. Approximate 5 year outdoor life, longer if parked indoors.

Optional matching steering wheel overlay, wheel center cap overlays, GT mirror logos, and door scuff plate decals available as well. The two color door scuff plate decals would match the two colors of your emblem overlay. For instance. a black background with red logo emblem overlay would result in a black "Stinger" and red "GT". If you want this reversed, note in in the "additional details" box. 

We ask for the wheel era as the 2022+ use larger caps with a larger logo so the first generation overlays won't fit the second generation wheels and visa-versa so we have to make the overlays different sizes depending on the year. 

Do not select the same exact color option for both the background and logo or you'll just end up with a single color oval. You can combine different gloss levels of the same color (gloss black and flat black for example) if you're looking for a subtle "blacked out" effect. 

Note the installation instructions are at the bottom of this item description. 

Design Types:
-The E logo symbolizes the maximized performance of its rear-wheel driving. It also stands for the company's new theme "'Engineered by Excellence." Aside from that, the logo means Exclusive, Exquisite and Evolutionary.
-The Vintage K aka "Klexus" logo is Kia's logo exclusively in South Korea. According to Kia, the oval represents the earth and the 3D lettering “signifies Kia’s dynamic growth in the world market.” Kia’s official color–red–emphasizes a strong determination to move forward.
-The GT logo is simply the same script as is found on the rear of the Stinger. It represents the "Grand Touring" roots of the Stinger. 
-The Stinger script logo is simply the same script as is found on the rear of the Stinger. It is the most subtle of the options available. Note the "Stinger" script is too small to last long on the steering wheel or wheel center caps so we don't offer that option.
-The Stinger GT logo is the "loudest" of the options. Note the "Stinger" script is too small to last long on the steering wheel or wheel center caps so we don't offer that option.
-The KIA 2022 logo is the design Kia uses on 2022 and later vehicles. It is simply a more modern and stylish K-I-A than the stock block lettering used on 2021 and older models. 

Installation: 

• Clean the stock KIA emblems well. Remove any road debris, bugs, wax, etc. Ideally you'd use an alcohol wipe or a light solution of dish soap to remove any oils for maximum adhesion.
• Peel the the white backing paper away from the overlay and make sure the overlay stays stuck to the clear mask. (Metallic Red Overlays will come with a white backing that has to be installed on the factory emblem BEFORE the overlay goes on). 
• Hold the edges of the clear mask so you can position the overlay without touching it. If you don't get perfect alignment initially, you can pull it back up if it's only stuck in the center. Once you've got it aligned with the emblem (even spacing all the way around), stick it to the middle of the emblem and then press it smooth from the middle to both sides of the oval shape. Then smooth the overlay down onto the emblem in a circular pattern starting at the center and making larger and larger circles.
• Now remove the clear overlay at an angle and do the same circular motion again until it's adhered smoothly all the way around the emblem. It may try to bulge along the outer edge as the overlay takes on the convex shape. If it does so, press the bulges out from the center to the edge to prevent it from wrinkling. Once it's smooth, give it more pressure in the same circular motion, especially around the outer edge.
• Add some heat with a hair dryer while doing the circular for best adhesion or to get out any stubborn areas that won't stay adhered to the emblem around the edge (but don't overheat it). Summer sun can be effective in providing enough heat if you don't have a hair dryer. 
• **For Carbon Fiber overlays, a hair dryer or heat gun is more important to get the thicker carbon material to bend around the convex emblem shape. I prefer a hair dryer simply because they aren't as hot as a heat gun so it's easier to maintain a good temperature without melting the material. When possible, try to get the overlay laying smooth with no bulges and then heat it up and rub the sticker in a circular motion from the center to the outer edge to form the overlay into the convex shape. If you have bulges around the edges and heat it up to try to make them go away (rather than getting them to go away before heat is added), it's much easier to wrinkle the overlay which is not ideal.