Front Mount Intercooler Kit for 83-86 Thunderbird Turbo Coupe

Are you looking for an easy way to add a front mount intercooler to your 2.3 Turbo powered Thunderbird?  There is nothing easier than purchasing this complete, bolt on, all inclusive Front Mount Intercooler Kit. These Intercooler Kits will allow you to run an extra 4-10psi over the stock configuration (with our manual boost controller). That additional 4-10psi can produce an extra 30hp-90hp depending on engine mods. This kit uses the Stinger Intercooler available on this site.

This FMIC kit allows the stock radiator to be used. The a/c condenser can be used if it is moved closer to the stock radiator by 1.0". Kit requires no modification to Thunderbird sheetmetal. Movement or removal of the carbon canister is required. Trimming of the inner fender plastic may also be required depending on vehicle. Trimming of the secondary hood latch brace is required. For stock T3 turbo with 2 bolt outlet, trimming of outlet so it's round/clamp on style or cutting stock outlet pipe 1.5" above top of flange and clamping to it, or running SVO compressor housing is required. Clocking of compressor housing is also required so the outlet points straight up or slightly to the passenger side (like intercooled 2.3 applications are). 

Designed To Fit:
-83-86 Thunderbird Turbo Coupe's
Will fit other applications with modification.
Kit Includes:
Everything needed to install:
-Intercooler 
-Tubing
-Silicone Couplers (Black or Blue)
-T-Bolt Clamps
Details:
-Tubing: 2.5" Aluminized Steel
-Intercooler: Rated for up to 700hp.
-Reduces air temp by 150-200ºF depending on Ambient temperature.


Front Mount Intercooler Kit 

-For Stinger style center mount header turbo placement only. 

-Standard Blow Off/Bypass Valve Tube is for our Dual Piston BOV or Single Piston BPV. This is a 1" OD Clamp-on Hose Connection, 1" Silicone Hose goes between bung and valve.

-If you are running a valve that requires a custom flange, you'll need to supply the flange and we will weld it on if you select the custom option below. 

-65mm Throttle Body option includes 2.5" to 3.0" adapter coupler and larger T-Bolt clamp for connection to the throttle body. 

Rotated intake manifold is not included with rotated tubing kits. See related products below for ported and/or rotated intakes.

 

Write a review

Please login or register to review

FMIC Kit | 83-86 Thunderbird | For Center Mount Header

  • $519.99


Available Options


Related Products

Intake Manifold - Ported | Gutted | Rotated Kit  | Upper & Lower

Intake Manifold - Ported | Gutted | Rotated Kit | Upper & Lower

Intake Manifold - Ported | Gutted | Rotated Kit | Upper & Lower High flow ported and gutted f..

$299.99 $339.99

Intake Manifold - Gutted | Ported Upper Only

Intake Manifold - Gutted | Ported Upper Only

Intake Manifold - Gutted | Ported Upper Only High flow ported and gutted factory 85.5-89 2.3 Turb..

$149.99 $169.99

Intake Manifold - Ported Lower Only

Intake Manifold - Ported Lower Only

High flow ported factory 85.5-89 2.3 Turbo lower intake manifold. Lower intakes are ported and ..

$149.99 $169.99

Intercooler | Front Mount | Stinger

Intercooler | Front Mount | Stinger

This Intercooler was designed specifically for SVO's and Turbo Coupes but will fit many other applic..

$289.99

FMIC Kit | Isuzu NPR | Volvo 740 | For Center Mount Header

FMIC Kit | Isuzu NPR | Volvo 740 | For Center Mount Header

2.5" Mandrel bent tubing for the Isuzu NPR and Volvo intercoolers mounted in the nose of SVO's, Turb..

$179.99

Blow Off Valve | Dual Piston

Blow Off Valve | Dual Piston

Designed for turbo cars with an Air Flow Meter (VAM/MAF), also works great with Speed Density (MAP) ..

$64.99 $69.99

Blow Off Valve | Type RFL Single Piston

Blow Off Valve | Type RFL Single Piston

For Speed Density Applications that don't have a MAF or VAM UNLESS it's a blow through MAF and the B..

$64.99

Bypass Valve | Single Piston

Bypass Valve | Single Piston

​Made from billet aluminum, this recirculating bypass valve dumps the boosted air back into the inta..

$64.99

FMIC Kit | 87-88 Thunderbird | For Center Mount Header

FMIC Kit | 87-88 Thunderbird | For Center Mount Header

Front Mount Intercooler Kit for 87-88 Thunderbird Turbo CoupeAre you looking for an easy way to add ..

$519.99

FMIC Kit | 83-86 Thunderbird | For Stock Location Exhaust Manifold

FMIC Kit | 83-86 Thunderbird | For Stock Location Exhaust Manifold

Front Mount Intercooler Kit for Thunderbird Turbo CoupesThis FMIC kit allows the stock radiator to b..

$519.99

Tags: Front, mount, intercooler, FMIC, Kit, header, center mount, location, thunderbird, turbo coupe, inter cooler, inter, cooler, inner, innercooler, IC, inter-cooler, inner-cooler, rotate, rotated, pipe, pipes, tube, tubing, tubeing, 2.3L, 2.3, 2.3T, 2.3 Turbo, Ford